KAIWEETS HT206D Digital Clamp Meter

KAIWEETS MULTIMETER 1 Visit the Store

KAIWEETS MULTIMETER 2 Visit the Store

Find more Visit the Store

Next page

Product Description Previous page Next page

1 DC CURRENT 2 AC CURRENT 3 NCV 4 TEMPERATURE TESTING 5 MULTIPLE FUNCTIONS

Jaw Design The Jaw is marked with the maximum voltage and current measured value, making it suitable for one-hand operation.

Automatic Shutdown If there is no operation in 15 minutes, the clamp meter will beep 3 times. Without further operation, it will beep again and automatically switch off.

Technical Comparison HT206D See Details

HT206A See Details

HT208D See Details

KC602 See Details

Maximum Display 6000 Counts 4000 Counts 6000 Counts 6000 Counts

AC Voltage 6V/60V/600V 4V/40V/400V/600V 600mV/6V/60V/600V/750V 600mV/6V/60V/600V

DC Voltage 600mV/6V/60V/600V 400mV/4V/40V/400V/600V 600mV/6V/60V/600V/1000V 600mV/6V/60V/600V

AC Current 60A/600A 4A/40A/400A/600A 60A/600A/1000A 60A/600A

DC Current 60A/600A — 60A/600A/1000A 60A/600A

Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ

Capacitance ✔ ✔ ✔ ✔

Temperature/Frequency ✔ ✘ ✔ ✔

NCV ✔ ✘ ✔ ✔

Flashlight/Backlight ✔ ✔ ✔ ✔

True-RMS Clamp Meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance, and also provides Diode, Continuity, and Temperature tests. It is true RMS for accurate measurements on non-linear loads. The multimeter is easy to use for labs, factories, and households.

LowZ & LPF: The low input impedance of the multimeter helps prevent false readings due to ghost voltage. It also features a Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformers. To measure the current, it is necessary to clamp the meter around one of the wires and not the whole power cord.

NCV Detection Function: The multimeter has a non-contact voltage detection function, which effectively checks the electrical status by measuring the EM field intensity without touching any wires. The NCV button is located on the right side, simply place your thumb on it and push.

Multi-function: The multimeter features a two-color backlit LCD Display. When the voltage is above 80V or the current is above 3A, the LCD backlit screen turns red to warn you of high voltage. It also has an LED flashlight, temperature measurement for liquids and air conditioning ports, included K-Type Thermocouple, low battery indication, and auto power off after 15 minutes of inactivity.

Safety Service: The multimeter meets safety standard IEC 61010-1, CAT III 600V. It has double insulation and comes with 36 months of product service. Additionally, there is 7/24 customer service available.

product information: